Super Color Check
This set is for dye checking cracks for leaks. It consists of six different aerosol liquids to be used as penetrant, developer and remover. Each aerosol can contains 350g.
Type : Spray type
Weight :each 350g (6 tins set) Color : ¨ç/¨é cleaner - transparent¨è penetration - red¨ê developer - white
Applications : Ferrous and non-ferrous metal, magnetic and non-magnetic metal, ceramic, glass, and plastic
Features : - No special equipment is not required, when indoor or outdoor. - Easy to handle even for the first time user - Easy to find even micro defects owing to the distinct red color appearance. - Can be applied on almost any material and shape. - Portable spray type - Non-corrosive, safe to use on aluminum alloy or magnesium alloy - As long as the test result is not cleaned out, it stays there.
Instruction : After red color check solution penetrates, the surface will be wiped out using cleaner. Then, developer is sprayed to show the defects.
1. Preparation(¨ç/¨é): Impurities such as dust, oily material, and rust on the test surface should be cleaned.
2. Penetration(¨è): When the surface is completely dried, spray red penetrating solution evenly from 20-30 cm away. It takes 3-5 minutes to penetrate, but 3-5 minutes apart repetition produces better results. The temperature of the equipment shall be 10-40¡ÆC. Please double the penetration time for the indoor test in winter. As this penetration solution is water soluble, it is easy to use.
3. Cleaning(¨ç/¨é)): When the penetration is completed, wipe out the surface with dry cloth or paper first, then clean with cleaner soaked cloth or paper afterwards. If you use white or near to white cloth or paper, it would be convenient to check the cleaning status. Avoid spraying directly on the test surface.
4. Development(¨ê): When the white developing solution is sprayed on the test surface, the location and the shape of the defects will be shown distinctly in red. |